PhotoMotion™ Combination Control Sensors
PhotoMotion™ sensors offer a combination of photocell control and dimming motion sensorcontrol. These sensors offer the maximum in energy savings and value. PhotoMotion™ sensors,when in installed and programmed properly, support California Title 24 compliant projects.
Combination photocell and dimming motion sensor controls light fixtures in two ways. A typical installation will control the light so that it turns off during the day. At night, the light fixture will illuminate at 30% of full brightness when no motion is detected. Upon detecting motion, the light fixture will increase to full brightness. Several minutes after motion has stopped, the light fixture will dim down to 30%. At sunrise, the photocell will detect the change in light levels and automatically switch the fixture completely off.
PhotoMotion™ sensors are fully programmable. PhotoMotion™ sensors can be mounted inside or adjacent to several Jarvis fixture models and can be pre-installed and pre-programmed at the factory, speeding up contractor installation time.
Contact a representative for more information regarding the functionality and energy efficiency improvements offered by PhotoMotion™ sensor