You have no items in your shopping cart.
When your application calls for an aesthetic design with industrial performance,look to the HCW Series for superior performance. Combining a sleek appearancewith an attractive bronze housing, this Half Circle Wall...
- Ideal for architectural lighting applications
- Built-in 120-277V photocell
- Durable die-cast aluminum housing
- LED array is angled forward to project light in an elegant forward direction
Wattage Range - 50W
Lumens Range - 5,127lm
Wall mounted light fixture for outdoor applications. AL Series wall pack features a 2-position mounting plate which can be adjusted by anyone on site. This fixture is suitable for many...
- Patented FlexPack design
- Can install as full cut-off and forward throw
- Knock-outs on all four sides and back
- Sized to cover wall scars
Wattage Range: 29-103W
Lumens Range: 3,182-13,910lm
4" or 5" Bronze Square 180° Double Bullhorn with 2 x 2-3/8" O.D. Mounting Tenons - Allows 2 light fixtures with standard round slip-fitters to install into a 4" or...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" White Square 180° Double Bullhorn with 2 x 2-3/8" O.D. Mounting Tenons - Allows 2 light fixtures with standard round slip-fitters to install into a 4" or...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
JSK Series LED Magnetic strip kit is used to upgrade existing 2x2 troffers to LED technology. JSK Series can replace T12, T8, or T5 tubes. With its quick installation, this...
- Ships as a complete kit in a single box
- Pre-installed glare diffuser creates better light
- Dimming and sensor capable
- Fits 99.9% of existing troffers
Wattage Range: 16-24W
Lumens Range: 2,132-3,145lm
The Jarvis JSK Series LED magnetic strip kit is a retrofit solution that upgrades existing 2x4 troffers to LED technology. The JSK Series can replace T12, T8, or T5 tubes....
- Ships as a complete kit in a single box
- Pre-installed glare diffuser creates better light
- Dimming and sensor capable
- Fits 99.9% of existing troffers
Wattage Range: 24-36W
Lumens Range: 3,349-5,084lm
Motion sensor with dimming and daylight harvesting capabilities for indoor fixtures. The A317M is designed to upgrade panel and troffer fixtures as well as retrofit kits with PhotoMotion™ capabilities. Featuring...
- Control both motion and daylight sensing
- Fast install with either included magnets or adhesive strips
- Adjust settings with dip-switch or remote
- Perfect for indoor retrofit kits or panel and troffer lighting
SALE
While Supplies Last
While Supplies Last
Motion Sensor with Daylight Sensing for Outdoor Light Fixtures Turns light fixtures off in the day, partially on at night when no motion is detected and fully on when motion...
- Control both motion and daylight sensing
- Adjust settings with dip-switch or remote
- Rated for outdoor use
- Slim profile
SALE
While Supplies Last
While Supplies Last
Button style photocell for light fixtures running on 120-277V. This can work with both LED lights and traditional lighting. Designed to mounted either inside a fixture’s knockout or weatherproof box...
- Delay feature prevents unwanted OFF switching
- Can be mounted in fixture knockout or junction box
- Rate for over >6,500 cycles
- Compatible with wide variety of fixtures
SALE
While Supplies Last
While Supplies Last
Dusk to Dawn Photocell for light fixtures running on 120-277V. 1/2" - 14 NPSM threaded stem. Can work with both LED lights and traditional lighting. Can handle up to a...
- Fits standard 1/2" knockouts
- Features a UV stabilized, high impact and durable plastic housing
- Rate for over >10,000 cycles
- Delay feature prevents unwanted OFF switching
SALE
While Supplies Last
While Supplies Last
Button style photocell for light fixtures running on 120V. Can work with both LED lights and traditional lighting. Designed to mounted either inside a fixture’s knockout or weatherproof box on...
- Delay feature prevents unwanted OFF switching
- Can be mounted in fixture knockout or junction box
- Rate for over >6,500 cycles
- Compatible with wide variety of fixtures
SALE
While Supplies Last
While Supplies Last
Dusk to Dawn Photocell for light fixtures running on 347V. 1/2" - 14 NPSM threaded stem. Can work with both LED lights and traditional lighting. Can handle up to a...
- Fits standard 1/2" knockouts
- Features a UV stabilized, high impact and durable plastic housing
- Rate for over >3,650 cycles
- Delay feature prevents unwanted OFF switching
SALE
While Supplies Last
While Supplies Last
Dusk to Dawn Photocell for light fixtures running on 480V. 1/2" - 14 NPSM threaded stem. Can work with both LED lights and traditional lighting. Can handle up to a...
- Fits standard 1/2" knockouts
- Features a UV stabilized, high impact and durable plastic housing
- Rate for over >3,650 cycles
- Delay feature prevents unwanted OFF switching
SALE
While Supplies Last
While Supplies Last
The A315 remote control allows for on-site custom programming of the A311P, A312P, A313P, A314P, A316P A317M, and A318M PhotoMotion™ Sensors. The remote allows you to customize the following functions:...
- On-site custom programming
- Remote range of 50'
- Easy to use
- Save custom created modes
The A314PLB and A314PHB can be mounted into a 1/2" NPT knockout on most indoor lighting fixtures and offers multi-level control based on motion and daylight contributions. Most commonly used...
- Control both motion and daylight sensing
- Adjust settings with dip-switch or remote
- Capable of on-site custom programming
- Fast installation through fixture knockout
Motion sensor light with multi-level control based on motion and daylight contributions. The sensor head can be mounted separately from the power supply, along with an easy installation process. Great...
- Control both motion and daylight sensing
- Adjust settings with dip-switch or remote
- Capable of on-site custom programming
- Slim profile
SALE
While Supplies Last
While Supplies Last
4" or 5" Bronze Square 90° Quad Bullhorn with 4 x 2-3/8" O.D. Mounting Tenons - Allows 4 light fixtures with a standard round slip-fitters to install into a 4"...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
SALE
While Supplies Last
While Supplies Last
4" or 5" White Square 90° Quad Bullhorn with 4 x 2-3/8" O.D. Mounting Tenons - Allows 4 light fixtures with a standard round slip-fitters to install into a 4"...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
This tenon, when installed with a T390 or T391 Round Pole Tenon, allows 2 light fixtures with a standard round slip-fitter to install into a round pole. Designed for quick...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
This tenon, when installed with a T390 or T391 Round Pole Tenon, allows 2 light fixtures with a standard round slip-fitter to install into a round pole at 180°. Designed...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
This tenon, when installed with a T390 or T391 Round Pole Tenon, allows 4 light fixtures with a standard round slip-fitter to install into a round pole. Designed for quick...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
This tenon, when installed with a T390 or T391 Round Pole Tenon, allows 3 light fixtures with a standard round slip-fitter to install into a round pole at 180°. Designed...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
This tenon, when installed with a T390 or T391 Round Pole Tenon, allows 3 light fixtures with a standard round slip-fitter to install into a round pole at 120°. Designed...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" Bronze Short 180° Twin Tenon with 2 x 2-3/8" O.D. Mounting Tenon - Allows 2 light fixtures with a standard round slip-fitters to install into a 4"...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" White Short 180° Twin Tenon with 2 x 2-3/8" O.D. Mounting Tenon - Allows 2 light fixtures with a standard round slip-fitters to install into a 4"...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
This tenon, when installed with a T390 or T391 Round Pole Tenon, allows 2 light fixtures with a standard round slip-fitter to install into a round pole at 180°. Designed...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" Bronze Short 90° Twin Tenon with 2 x 2-3/8" O.D. Mounting Tenon - Allows 2 light fixtures with standard round slip-fitters to install into a 4" or...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" White Short 90° Twin Tenon with 2 x 2-3/8" O.D. Mounting Tenon - Allows 2 light fixtures with standard round slip-fitters to install into a 4" or...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
This tenon, when installed with a T390 or T391 Round Pole Tenon, allows 2 light fixtures with a standard round slip-fitter to install into a round pole at 90°. Designed...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" Bronze Short 90° Triple Tenon with 3 x 2-3/8" O.D. Mounting Tenon - Allows 3 light fixtures with standard round slip-fitters to install into a 4" or...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" White Short 90° Triple Tenon with 3 x 2-3/8" O.D. Mounting Tenon - Allows 3 light fixtures with standard round slip-fitters to install into a 4" or...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
This tenon, when installed with a T390 or T391 Round Pole Tenon, allows 3 light fixtures with a standard round slip-fitter to install into a round pole at 90°. Designed...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" Bronze Short 90° Quad Tenon with 4 x 2-3/8" O.D. Mounting Tenon - Allows 4 light fixtures with standard round slip-fitters to install into a 4" or...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" White Short 90° Quad Tenon with 4 x 2-3/8" O.D. Mounting Tenon - Allows 4 light fixtures with standard round slip-fitters to install into a 4" or...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
This tenon, when installed with a T390 or T391 Round Pole Tenon, allows 4 light fixtures with a standard round slip-fitter to install into a round pole at 90°. Designed...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
SALE
While Supplies Last
While Supplies Last
The A312P and A313P can be mounted into a 1/2" NPT knockout on most outdoor lighting fixtures and offers multi-level control based on motion and daylight contributions. Most commonly used...
- Control both motion and daylight sensing
- Rated for outdoor use
- Perfect for wall-mount applications
- Capable of on-site custom programming
90° Bronze Direct Mount Tenon with 2-3/8" O.D. Round Tenon - Allows a light fixture with a standard round slip-fitter to install into a wall or 4"x4" flat surface
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
90° White Direct Mount Tenon with 2-3/8" O.D. Round Tenon - Allows a light fixture with a standard round slip-fitter to install into a wall or 4"x4" flat surface
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
Allows a light fixture with a standard round slip-fitter to install into the side of a round light pole. Features two slotted mounting holes for easy installation.
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
Allows a light fixture with a standard round slip-fitter to install into the side of a round light pole. Features two slotted mounting holes for easy installation.
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
Allows a light fixture with a standard round slip-fitter to install into the flat side of a square light pole. Features two slotted mounting holes for easy installation.
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
Allows a light fixture with a standard round slip-fitter to install into the flat side of a square light pole. Features two slotted mounting holes for easy installation.
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
This tenon allows a single light fixture or a round pole multi-light tenon with a standard round slip-fitter to install into a 4" or 5" round pole. Designed for quick...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" Bronze Square Pole Mount Tenon with 2-3/8" O.D. Round Tenon - Allows a light fixture with a standard round slip-fitter to install into a 4" or 5"...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
4" or 5" White Square Pole Mount Tenon with 2-3/8" O.D. Round Tenon - Allows a light fixture with a standard round slip-fitter to install into a 4" or 5"...
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
Bronze Wall Mount Tenon with 2-3/8" O.D. Round Tenon - Allows a light fixture with a standard round slip-fitter to install into a wall or 4" x 4" flat surface.
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in bronze finish
White Wall Mount Tenon with 2-3/8" O.D. Round Tenon - Allows a light fixture with a standard round slip-fitter to install into a wall or 4" x 4" flat surface.
- Steel Construction
- UV Resistant Powdercoat
- Stainless Steel Fasteners
- Availaible in white finish
High quality and long lasting LEDs to be useful in a wide variety of flood lighting applications. This light fixture is available in 4 different mounting options and 2 voltage...
- Features advantage NEMA Type 7Hx6V optics for better light placement
- Multiple mounting options including slipfitter, knuckle, trunnion and yoke
- Impact resistant lens
- High-efficiency optical system for maximum energy efficiency
Wattage Range: 135-200W
Lumens Range: 18,000-26,200lm
High quality and long lasting LEDs, this light fixture is perfect for a wide variety of flood lighting applications. This light fixture is available in 4 different mounting options and...
- Features advantage NEMA Type 7Hx6V optics for better light placement
- Multiple mounting options including slipfitter, knuckle, trunnion and yoke
- Impact resistant lens
- High-efficiency optical system for maximum energy efficiency
Wattage Range: 15-200W
Lumens Range: 2,200-26,200lm
This component will allow you to mount an AL Series FlexPack™ Wall Pack on an existing 2-5/8" round tenon or metal pipe. Picture shown is the slipfitter part attached to...
- Mount AL Series FlexPack™ LED Wall Pack to existing 2-5/8" round tenon or metal pipe
- UV Resistant Powdercoat
- Availaible in bronze or white finish
- 180° Adjustable Arm
